Wismec

Wismec Reuleaux Tinker 2 Kit

$99.99 Save $-99.99
0 in stock

The Reuleaux Tinker 2 from Wismec has a fancy appearance with powerful functions --- powered by dual 18650 batteries, it features a 0.96 inch color-screen with a max wattage of 200W. Tinker 2 is also a completely durable mod that is designed to be waterproof, shockproof, and dust-proof. It comes with a powerful new atomizer -- Trough -- which uses the new WT coils to give you the purest flavor and massive clouds from your choice of e-liquid. With all new and powerful innovations in place, the Tinker 2 will definitely ensure you have an excellent vaping experience.

TINKER 2 MOD

FASHIONABLE APPEARANCE WITH FOUR COLOR OPTIONS - The Tinker 2 is a work of art with its perfect combination of leather and metal, making it sumptuous and distinctive. Available in four different color options -- Titanium Gray, Blue&Purple, Black, and Red.

SIX MATERIALS - The mod overall uses 6 different materials to provide the user with different visual and tactile experiences -- Zinc Alloy, ABS, Aluminum Alloy, Leather, Stainless Steel, and Silicone. The crocodile-like leather with its clear and glossy texture stands out in its appearance but is also comfortable in hand and still quite durable.

Mod Specifications:

  • Size: 90mm x 53.5mm x 28.5mm
  • Weight (without cells): 200.7g
  • Thread Type: 510 spring loaded connector
  • Cell Type: Two high-rate 18650 cells (discharge current should be above 25A)
  • Output Mode: TC-Ni / TC-Ti / TC-SS / TCR (M1, M2, M3) / VW Mode
  • Output Wattage: 1-200W
  • Resistance Range: 0.05-1.5Ω for TC Modes / 0.05-3.5Ω for VW Mode
  • Maximum Charging Current: 2A
  • Output Voltage Range: 0.5-8V

IP67 CERTIFICATE IN WATERPROOF FUNCTION - The waterproof grade of the Tinker 2 meets the IP67 requirement. It can be soaked in deep water -- up to a meter high, for 30 minutes!

SAY GOODBYE TO ACCIDENTAL BREAKING WITH THE SHOCKPROOF FEATURE - Ever had a device stop working because you accidentally dropped it? The new shockproof design of the Tinker 2 is designed to protect against such falls so it still works normally after. 

Remember --- the shockproof feature is designed to protect the Tinker 2 but do not purposefully drop it when equipped with batteries above a meter high off the ground as its waterproof capability may be compromised by damage.

DUST-PROOF - This new feature allows the Tinker 2 to withstand dirty conditions, obviously making it even more durable.

DUAL 18650 MOD - Powered by dual 18650 batteries, its max output power can reach up to 200 watts, surely satisfying your daily vaping needs.

0.001 SECOND INSTANT FIRE BY AVATAR CHIP - The Tinker 2 adopts the self-developed avatar chip, allowing users to enjoy vaping more safely and reliably under a variety of protection systems. The Avatar chip allows the product to quickly ignite at a speed of 0.001 seconds. Get ready to enjoy vaping as fast as you can!

TROUGH TANK 

EXQUISITE APPEARANCE WITH EFVP TECHNOLOGY - Available in 4 colors, the Trough not only looks stylish, but also adopts an innovative technology -- Environmentally Friendly Vacuum Plating -- to ensure better color durability and excellent texture. In addition, the pattern of the atomizer is completed through a precision machining technique. Wismec has carefully carved every detail in this tank to present to you the best possible product.

30% WOOD PULP + 70% ORGANIC COTTON - The WT Mesh Coils adopts brand-new cotton, with the formula consisting of 30% wood pulp and 70% organic cotton. The wood pulp composite technology combined with the micro-porous technology makes for better e-liquid permeability and a more uniform flavor.

360° DIVERSION E-LIQUID LEADING SYSTEM - The WT Mesh Coils feature a more accurate and efficient e-liquid function. Each heating unit corresponds to an individual e-liquid inlet hole. Together, all the inlet holes form a 360° all-around e-liquid leading system, thus preventing leakage and ensuring excellent flavor.

Tank Specifications:

  • Diameter: 30mm
  • Height: 50mm
  • Weight: 61.5g
  • E-Liquid Capacity: 6.5mL

RESTORING THE MOST AUTHENTIC E-LIQUID FLAVOR --- WT MESH COILS - The diamond shaped heater with large heating area makes the heating more uniform and the atomizing effect even better when compared to a normal coil. If you want to enjoy the most authentic flavor from your e-liquid, the WT Mesh Coils are the way to go.

QUICK-SLIDING TOP-FILL DESIGN - Simply slide the top cap and refill with ease. The filling slot is designed with silicone which can isolate air and prevent e-liquid leakage effectively and provide a more pure flavor.

AIRFLOW - The Trough Tank has a large airflow slot which accounts for about 50% of the atomizer base, allowing you to bring more air in and produce bigger clouds. By rotating the airflow control ring only, you can adjust the airflow to your preference.

PURE FLAVOR & MASSIVE CLOUDS - The WT Coils meet different vaping needs and provides various atomization experiences. Whether you are in pursuit of the pure taste of your e-liquid or huge clouds, you will always be satisfied with our WT01 Single 0.35Ω and WT02 Dual 0.2Ω heads, both with large range power.

Kit Includes:

  • 1 x Reuleaux Tinker 2 Mod
  • 1 x Trough Tank
  • 1 x WT01 Single 0.35Ω Coil
  • 1 x WT02 Dual 0.2Ω Coil
  • 1 x QC USB Cable
  • 2 x User Manuals
  • 2 x Warning Cards
  • Spare Parts
Wismec Reuleaux Tinker 2 Kit

You may also like

Quick view
Starss Vape Blazer Kit
Starss Vape
$99.99
Quick view
Vandy Vape Berserker MTL Starter Kit
Vandy Vape
$49.99
Quick view
Aspire Tigon Kit
Aspire
$54.99
Quick view
Sigelei Chronus Kit
Sigelei
$89.99
Quick view
Sigelei Chronus Shikra Edition Kit
Sigelei
$99.99
Starss Vape

Starss Vape Blazer Kit

$99.99 Save $-99.99
The Blazer Kit is a unique, ergonomic 75W TC Box Mod which features the iron metal style architectural structure and emulates the precision machining and creative designs of Starss Vape. It is clip designed, powered by a single 18650 battery, output wattage range from 5-75W. There are 0.25Ω ceramic coils and 0.5Ω ceramic coils for different flavors, plus the 4.5mL refillable tank capacity brings ample space for liquid juice storage, and adjustable airflow. With the Starss Vape designed 75W chipset microprocessor, it can provide multiple power functions, modes and multiple protections which including PCB temperature overheating protection, low power alert, atomizer short-circuit protection, no atomizer and low resistance protection. The Starss Vape Blazer Kit is compatible with most tanks with 510 threading. The up and down buttons can adjust the temperature for heating the ceramic coil during operation from 5W to 75W, and also change the LED light color in the middle on both sides.

Features:
  • Dimensions: 78mm * 51mm * 27mm
  • Power range: 5W to 75W
  • Temperature range: 100°C to 300°C or 200°F to 600°F
  • Output Modes: POWER /SS/Ti/Ni/Bypass
  • Resistance: 0.08-3.0ohm
  • Thread type: 510
  • Tank capacity: 4.5mL
  • Net Weight: 173g
  • Battery: 1 x 18650 battery (not included)
  • Screen: 0.96 OLED
Kit Contents:
  • 1 x STARSS Blazer Box mod
  • 1 x STARSS Blazer Tank (compatible with V8 baby mesh)
  • 1 x A50 Coil with 0.5Ω dual coils (pre-installed)
  • 1 x A20 Coil with 0.2Ωdual coils
  • 1 x User Manual
  • 1 x Micro USB Cable
  • 1 x Accessories bag (replacement glass, O-rings)
  • 1 x Battery Warning Card
Starss Vape Blazer Kit
Vandy Vape

Vandy Vape Berserker MTL Starter Kit

$49.99 Save $-49.99
The Berserker MTL Starter Kit by Vandy Vape is a discreet pen-style system featuring a 3.5mL max fill capacity, integrated rechargeable battery, and five adjustable bottom airflows that utilize a dedicated Berserker MTL Coil System. It is powered by an integrated 1100mAh rechargeable battery, allowing the user to have a long lasting vape experience. In addition, the LED battery indicator lights that surround the intuitive firing button will change colors to give hint to the mode or status of the battery, while giving dependable feedback to the user. Furthermore, the Berserker MTL Kit has a plethora of air flow controls that can be adjusted by increments of 0.2 millimeter dependent on the strength of nicotine salt within. The Berserker MTL Kit can be refilled by unscrewing the top cap and removing it to fill from above. The included Berserker MTL SubTank is constructed to use a wide range of eLiquids and Nic Salts, including a pair of 1.5ohm Berserker MTL Coil and 1.8ohm Berserker MTL Coil working in synergy with the airflow for desired vape experience.

Main Features:
  • Nic Salt Compatible
  • Horizontal Coil
  • Great for 50/50 juice
  • The real experience of MTL vaping
  • Small in size
  • Daily vaping MTL kit
  • Safe and Secure 1100mAh Internal Battery - Higher power, longer battery life.

Specifications:
  • Mod Dimensions: 75.5mm x 19mm
  • Atomizer Dimensions: 47.65mm x 19.5mm
  • General Weight (Package Included): 180g
  • Working Voltage: 3.2-4.2V
  • Coil Resistance: 1.0-3.0 Ohms
  • Charging Current: 800mA (Battery 1100mAh)
More Mode Options with LED Display - constant voltage mode, bypass mode
  • WHITE - Bypass Mode
  • ORANGE - Constant Voltage Mode
  • RED - Low Power Prompt
Overload and short-circuit protection!

Adjustable Airflow Options:
  • 0.8mm - 50-60mg for Nic Salt
  • 1.0mm - 40-50mg for Nic Salt
  • 1.2mm - 30-40mg for Nic Salt
  • 1.4mm - 20-30mg for Nic Salt
  • 1.6mm - 10-20mg for Nic Salt
Kit Contents:
  • 1 x Berserker MTL Tank
  • 1 x Berserker Mod
  • 1 x Drip Tip
  • 1 x Berserker MTL 1.5 Ohm Coil (7-15W / Best: 10W)
  • 1 x Berserker MTL 1.8 Ohm Coil (7-13W / Best: 8W)
  • 1 x Pyrex Glass
  • 1 x Instructional Manual
  • 1 x QC USB Cable
  • 1 x Spare Parts Bag
Vandy Vape Berserker MTL Starter Kit
Aspire

Aspire Tigon Kit

$54.99 Save $-54.99
An all new ‘stick’ style device from Aspire. Introducing the Tigon Kit, an easy to use ‘child safe’ compact device. It comes in four stylish color finishes, Stainless Steel, Blue, the ever-popular Rainbow, and Black. It can be used as an MTL (mouth to lung) or a restricted DTL (direct to lung) vape. It comes with a long-lasting built-in battery and works in ‘By-Pass’ mode. Whichever color you choose, you can be sure of a great performing everyday compact device for purse or pocket. It is the first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.

Specifications & Features:
  • Dimensions: 142mm x 24.5mm
  • Capacity: 3.5mL
  • Coil Resistance: 1.2 ohms (10-12W) & 0.4 ohms (23-28W)
  • Output Voltage: 3.3-4.2V
  • Continuous Firing Time: 10 Seconds
  • Battery Type: built-in (internal)
  • Battery Capacity: 2600mAh
  • E-Liquid sealing mechanism
  • Built-in childproof safety features
  • Easy top-fill
  • Suitable for both MTL hits and restricted lung hits
  • Supreme flavor production
The Tigon Kit comes supplied with a choice of MTL, longer style drip tip, and a slightly wider bore 'stubby' style drip tip more suited for restricted DTL hits.

Aspire has included more flexibility in the Tigon Kit by including two types of push fit coils. A 0.4 ohm DTL style coil designed to run from 23-28 watts and a 1.2 ohm coil designed to run at 10-12 watts more suited to MTL style vaping. Both coils are made from high grade nichrome wire, with great wicking properties for a flavorful vape. The push fit coils help reduce mess when changing and are much easier to remove and replace. The 1.2 ohm coil would be more suited for nic salt type e-liquids but can equally be used with normal e-liquid.

Filling couldn’t be simpler in a child proof/leak proof tank of this type. First pull up on the top cap, then with your thumb or finger on the marker, slide open the top cap to reveal the silicon leak proof seal of the fill port. Closing the tank is the opposite, slide the top cap back into place covering the silicon seal and push down. Remember, when using a new coil, to let the cotton of the coil saturate in the e-liquid for 5 minutes or so before you start to vape. This will ensure that you don’t get dry hits or damage the coil.

INGENIOUS SELF-SEALING COIL HOUSING - The first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed. On the Aspire Tigon Tank, coil replacement is just a case of unscrewing the base hardware, pulling out the old coil and replacing with a new one. Then screwing the base hardware back on again.

***Note that the Tigon Tank can still hold e-liquid when changing the coil, this is because the wicking holes in the tank are covered by a spring loaded sleeve that will slide shut sealing the holes when the coil is removed.

ASPIRE TIGON AIRFLOW - The Tigon Tank has Aspire's new dual function airflow settings. Turning it initially will reveal five smaller holes that can be adjusted from five to four then three, two, one. This is for the MTL type vaping with one small hole being the tightest draw. Rotating the airflow adjustment further will reveal a 'slot' style airflow adjustment. Again this can be adjusted from wide open to almost closed for a restrictive DTL type hit.

CHARGING - Charging is carried out using the supplied USB Cable. Attach the USB cable to the body of the Tigon Kit and connect to a suitable power supply. When charging, the indicator light will indicate the charge status of the device (3.5V or less - red; 3.5-3.8V - blue; above 3.8V - pink) When fulled charged, the light will flash 20 times and switch off. The maximum charge current can reach up to 2A.

Kit Contents:
  • 1 x Tigon Battery
  • 1 x Tigon Tank
  • 1 x 0.4 Ohm Coil (pre-installed) (23-28W)
  • 1 x 1.2 Ohm Coil (extra) (10-12W)
  • 1 x Replacement Glass Tube
  • 10 x O-Rings
  • 1 x Screw Adjustment Tool
  • 1 x USB Cable
  • 1 x Warranty Card
  • 1 x User Manual
Aspire Tigon Kit
Sigelei

Sigelei Chronus Kit

$89.99 Save $-89.99
The legacy of the Shikra stands for bravery, strength, and inspiration. The Chronus, the newest in the Shikra series, are the first box mods in the history of Sigelei to offer a distinctly plated navigational joystick. The customized UI, combined with a beautiful round TFT display, tailors your vaping experience to your style. The optimized Chipset integrates an Insta-Fire rate of 0.001 second firing speed with a safe heating function to provide the most pure and rich flavor from the first puff to the last!

Main Features:
  • The High Sensitivity Airflow Control System ensures you can enjoy subtle flavor changes when you adjust the airflow.
  • 5 Direction Joystick is very easy to navigate.
  • The Chronus Kit is made of Zinc Alloy and Aluminum, having the same material as Apple, making it ergonomic and very comfortable in hand.
  • INSTANT FIRING SYSTEM - 0.001s instant firing system ensures you enjoy the most flavorful vapor from your first puff to your last.

POWERFUL CHIPSET FEATURES - MULTIPLE SAFETY FUNCTIONS
  • Supported Modes: POWER / TCR / TFR / SS304 / SS316 / SS317 / Ti1 / Ni200
  • High wattage and low wattage protection, short-circuit protection, high temperature protection, battery reverse protection
Chronus Mod Specifications:
  • Size: 88.2mm x 44mm x 31mm
  • Material: Zinc Alloy + Aluminum Alloy
  • Wattage Range: 10-200W
  • Voltage Input: 6.4-8.4V
  • Voltage Output: 1.0-7.5V
  • Battery Support: 2 x 18650
  • Resistance Range: 0.05-3.0 Ohms
  • Coil Supporting: Kathal / SS (304/316/317) / Titanium / Ni200 / TCR
  • Temperature Range: 100-300 C / 200-570 F
  • Charging Support (Micro USB): DC 5V/2.5A
  • Support firmware upgrading and set-up the device through the USB Cable, can also change image of main interface.
NEWLY DESIGNED AIRFLOW CHANNEL ON SHIKRA TANK - This newly designed airflow channel can take away 30% to 50% more heat than a regular tank as it will stay relatively cool during usage.

COIL COMPATIBILITY - There are 3 different coils recommended for use with the Shikra Tank: MS-H 0.2 Ohm (60-120W) (pre-installed), MS 0.25 Ohm (40-80W) (Extra), and MS-M 0.2 Ohm (40-80W) Coils.

Shikra Tank Specifications:
  • Size: 24mm x 44.4mm
  • Capacity: 5.5mL
  • Material: SS303 + Transparent glass
  • Fill Style: Top Fill
  • Airflow Control Design: Adjustable Bottom Airflow
TOP REFILL SYSTEM - Twisting to open the top cap makes filling very easy to do. Leak-proof slot can significantly lower the chance of leaking e-liquid.

Kit Includes:
  • 1 x Chronus Mod
  • 1 x Shikra Tank
  • 1 x MS-H 0.2 Ohm Coil (60-120W) (pre-installed)
  • 1 x MS 0.25 Ohm Extra Coil (40-80W)
  • 1 x Replacement Glass Tube
  • 1 x USB Cable
  • 2 x User Manuals
  • 1 x Warranty Card
  • Spare Parts
Sigelei Chronus Kit
Sigelei

Sigelei Chronus Shikra Edition Kit

$99.99 Save $-99.99
The legacy of the Shikra stands for bravery, strength, and inspiration. For those reasons, Sigelei has chosen to name this wonderfully designed kit the Shikra (a limited edition of the Chronus Kit). The Shikra, along with the Chronus, are the first box mods in the history of Sigelei to offer a distinctly plated navigational joystick. The customized UI, combined with a beautiful round TFT display, tailors your vaping experience to your style. The optimized Chipset integrates an Insta-Fire rate of 0.001 second firing speed with a safe heating function to provide the most pure and rich flavor from the first puff to the last!

Main Features:
  • The High Sensitivity Airflow Control System ensures you can enjoy subtle flavor changes when you adjust the airflow.
  • 5 Direction Joystick is very easy to navigate.
  • The frame is made of Stainless Steel and will give you a good, qualified sense.
  • INSTANT FIRING SYSTEM - 0.001s instant firing system ensures you enjoy the most flavorful vapor from your first puff to your last.
POWERFUL CHIPSET FEATURES - MULTIPLE SAFETY FUNCTIONS
  • Supported Modes: POWER / TCR / TFR / SS304 / SS316 / SS317 / Ti1 / Ni200
  • High wattage and low wattage protection, short-circuit protection, high temperature protection, battery reverse protection
  • UI OPTIONS - The UI offers elegant customization options to the main and standby screens.

Shikra Mod Specifications:
  • Size: 88.2mm x 44mm x 31mm
  • Material: Zinc Alloy + Stainless Steel
  • Wattage Range: 10-200W
  • Voltage Input: 6.4-8.4V
  • Voltage Output: 1.0-7.5V
  • Battery Support: 2 x 18650
  • Resistance Range: 0.05-3.0 Ohms
  • Coil Supporting: Kathal / SS (304/316/317) / Titanium / Ni200 / TCR
  • Temperature Range: 100-300 C / 200-570 F
  • Charging Support (Micro USB): DC 5V/2.5A
  • Support firmware upgrading and set-up the device through the USB Cable, can also change image of main interface.
NEWLY DESIGNED AIRFLOW CHANNEL ON SHIKRA TANK - This newly designed airflow channel can take away 30% to 50% more heat than a regular tank as it will stay relatively cool during usage.

COIL COMPATIBILITY - There are 3 different coils recommended for use with the Shikra Tank: MS-H 0.2 Ohm (60-120W) (pre-installed), MS 0.25 Ohm (40-80W) (Extra), and MS-M 0.2 Ohm (40-80W) Coils.

Shikra Tank Specifications:
  • Size: 24mm x 44.4mm
  • Capacity: 5.5mL
  • Material: SS303 + Transparent glass
  • Fill Style: Top Fill
  • Airflow Control Design: Adjustable Bottom Airflow
TOP REFILL SYSTEM - Twisting to open the top cap makes filling very easy to do. Leak-proof slot can significantly lower the chance of leaking e-liquid.

Kit Includes:
  • 1 x Shikra Mod
  • 1 x Shikra Tank
  • 1 x MS-H 0.2 Ohm Coil (60-120W) (pre-installed)
  • 1 x MS 0.25 Ohm Extra Coil (40-80W)
  • 1 x Replacement Glass Tube
  • 1 x USB Cable
  • 1 x Electrode Converter
  • 2 x User Manuals
  • 1 x Warranty Card
  • Spare Parts
Sigelei Chronus Shikra Edition Kit
Sigelei

Sigelei SnowWolf Mfeng Baby Kit

$79.99 Save $-79.99

The Mfeng Baby is the compact version of the original SnowWolf Mfeng Kit, from Sigelei, with comfort and portability being at the forefront of the design. The Mfeng Baby will include an internal 2000mAh battery to meet your daily vaping needs. To keep the device from falling into the wrong hands, we have created a Child Proof Safety Lock into every device.

EASY-TO-USE KIT - This kit is very convenient, supporting USB charging to the internal 2000mAh battery, extending battery life. Together with the small size, it is very portable and extremely easy to use!

CHILD SAFETY LOCK - Every Mfeng Baby has the child lock option to prevent unintended usage. The password is user defined and would need to be entered in order to resume regular usage.

Mfeng Baby Mod Specifications:

  • Size: 27mm x 44mm x 68mm
  • Main Material: Zinc Alloy
  • Display: 0.91 inch OLED
  • Wattage Range: 10-80W
  • Voltage Input: 3.2V~4.2V
  • Voltage Output: 1.0V-7.5V
  • Battery Support: internal 2000mAh
  • Temperature Range: 100 ~ 300 C / 212 ~ 572 F
  • Modes: PWR (WATT/VOLT/M1-M5) / Ti1 / Ni200 / 304 / 316 / 317 (Normal/M1-M5)
  • Resistance Range: 0.05 - 3.0 ohms
  • Charging Support (Micro USB): DC 5V/2.5A

WORKING MODE - This Mfeng Baby Kit supports power mode and TC mode; in the power mode it supports wattage, voltage, and M1-M5 mode as well, making it super easy for your preference.

3D SNOWWOLF LOGO - A 3D SnowWolf logo is found on the front cover with a decorative accent plate on the back cover.

Wolf Tank Mini Specifications:

  • Size: 25mm x 46.7mm
  • Coil: WF Mini Coil
  • Coil Size: 14.7mm x 21.7mm
  • Heating Coil Material: SUS316L
  • Coil Resistance: 0.28 ohms
  • Interfaces Type: 510
  • Best Power: 30-60W (WF Mini Coil)
  • Tank Materials: SS303 + Transparent Glass
  • Maximum Juice Capacity: 5.0mL
  • Fill Style: Top-Fill
  • Airflow Control Design: Adjustable Bottom Airflow

WOLF TANK MINI - Each kit is paired with the Wolf Tank Mini. The Wolf Tank Mini has a 5mL e-liquid capacity that rivals any tank. The anti-leak slot prevents any type of leakage before it even happens. The Wolf Tank Mini Coils have been precisely engineered for maximum flavor output while prolonging the lifespan of the coil.

THREE DIFFERENT COILS (WF Mini Coil, WF-H Mini Coil, MS-M Coil) - All heating coils from Sigelei are made of medical grade 316L Stainless steel material to prevent harmful substances from releasing while in usage. The lead wire is made from pure nickel material, ensuring unsurpassed conductivity. Wicking medium is made of the clean and odorless medical grade cotton to restore the most pure taste possible from your e-liquid. Consumers use e-cigarettes instead of cigarettes for health purposes. Sigelei uses the best materials to ensure e-cigarettes are safer and healthier than conventional smoking.

Kit Includes:

  • 1 x Mfeng Baby Mod
  • 1 x Wolf Tank Mini
  • 1 x Extra WF-H Coil (Same as MS Coil)
  • 1 x Normal Glass Tube
  • 1 x Sealing Ring
  • 1 x USB Cable
  • 2 x User Manuals
  • 1 x Warranty Card
  • 1 x Certificate
Sigelei SnowWolf Mfeng Baby Kit
Back to Mods